Elastomeric Roof Coatings - EPDM Coatings | Liquid Roof

1. NAME
EnergyGuard™ Elastomeric Roof Coating

2. DESCRIPTION
EnergyGuard™ Elastomeric Roof Coatingoffers an acrylic coating for any type of roof with a high solids compound.

GENERAL USES
Use the product for a number of surfaces including wood and single-ply roofing, masonry, concrete roofs, BUR, and modified bitument.

PROS

Superb UV and ozone protection
Seamless, durable membrane
Reduces energy bills
Prevents aging and deterioration
Non-toxic
Heat reflective
Has fungicides and mildewcides
Great adhesion
Extends roof life
Easy to use

3. TECHNICAL INFO
See table.

4. INSTALLATION

Remove any debris, oil, and peeling paint.
Check for existing solid adhesion.
Clean the surface with a power washer, allow to dry.
Do not thin the product.
Do not leave containers open.
Follow instructions on the label.
For sprayers, use: Airless Sprayer, 1gpm, 3,000 psi, .027 or .031 tip.
Select a quality paintbrush.
Select a short nap roller.
Clean afterwards with water.

5. DIY SOLUTION THAT’S COST-EFFECTIVE
EnergyGuard™ Elastomeric Roof Coating is only available from EPDM Coatings. Contact us directly for a price quote.

6. WARRANTY
A 10-year warranty is available—restrictions apply. You must properly prep the surface, choose a surface that’s compatible, and properly apply the product for warranties to be in effect. Contact us for more information.

7. MAINTAINING YOUR SURFACE
Routine maintenance is recommended .

EnergyGuard™ Elastomeric Roof Coating INFORMATION

Property	Value	Test Method
Viscosity:	6,000 - 8,000cps	Brookfield
Tensile Strength:	400 ± 50 psi	ASTM D-412
Solids by weight:	68% ± 2%
Solids by volume:	60% ± 2%
Shelf Life:	12 months @ 40°-90°F
Permeability:	3.5 perms	ASTM E-96
Hardness:	45 Shore A	ASTM D-2240
Flash Point:	None
Elongation:	315%	ASTM D-412
Density:	11.2 ± .2 lbs per gallon
Color:	White or any custom color
Clean Up:	Water

Note: You’re working with EnergyGuard™ Elastomeric Roof Coatings, which can freeze. Do not apply in freezing conditions, or store in temperatures lower than 32° F. In order to be effective, you must apply the product in dry conditions. In case of emergency, call your physician. If swallowed, do not induce vomiting.

Your Elastomeric Coating

Your new coating is elastic, and can stretch for different weather and temperature conditions. The original shape will be retained. You should apply this coating thicker than paint, with 20 mil. being ideal. Apply elastomeric coatings on almost any surface. Common elastomerics include butyl, silicone, urethane, and acrylic.

Step by Step Guide to Roof Restoration

	Cleaning and Prepping Remove any large debris, and power wash the roof. Check for peeling, holes, tears, rips, and any other damaged areas. Algae and other live issues should be properly addressed.
	Priming Choose the right primer to ensure a great adhesion. You can even apply a primer directly onto some rust—and never have rust again. Contact us for information on which primer is best for you.
	Sealing Flash any holes, gaps, tears, or other dangerous spots. You can use caulk or another approved sealant.
	Coating Time Do one final check before applying your coating. Remember that a coating can’t work miracles—holes, tears, and dirt that aren’t fixed can cause problems.

Check Out These Perks

Coating is about half the cost of re-roofing.
Drastically lower your energy bills.
Quickly—and permanently—fix leaks.
Enjoy a 10-year warranty.

Equipment to Get
An airless sprayer is the best way to apply the product, especially a machine that offers three gallons per minute with a pressure of 3000 psi.

Facebook Twitter YouTube

Please input dimensions:

EnergyGuard™ Elastomeric Roof Coating INFORMATION

Your Elastomeric Coating

Step by Step Guide to Roof Restoration