|Coverage 250 sq ft (available in 5 gallon pails only)
Order Here Cost is $137.50/Pail
EnergyGuardT Acrylic Rust Prevention Primer
EnergyGuard Acrylic Coating is a high solids, acrylic elastomeric coating for all types of roofs.
Asphalt Roofs, Built Up Roofs (BUR), Concrete Roofs, Masonry, Metal Roofs, Modified Bitumen, Polyurethane Foam Roofs, Single Ply Roofs and Wood.
Provides a seamless, durable membrane. Superior adhesion to various substrates. Contains fungicides and mildewcides. Excellent UV protection for polyurethane foam. Heat reflective coating helps reduce cooling costs. Reflects the sun's UV-rays and prevents premature degradation. Prevents premature roof failure by controlling thermal cycling. Easy to use, non-toxic and VOC compliant water based coating.
5 gallon buckets, 55 gallon drums.
All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
EnergyGuard Acrylic Roof Coating is ready to use. Thinning is not recommended. Containers should not be left open for extended periods of time.
Follow our roof restoration procedures and always perform a coating adhesion test before doing the entire roof.Spray: Airless Sprayer, 1gpm, 3,000 psi, .025 or .031 tip.
Brush: Good quality synthetic bristle brush.
Roller: Short nap roller.
Clean Up: Water
Caution: EnergyGuard Acrylic Roof Coating is a water-based product which will freeze and become unusable at temperatures below 32�F. Suspend all application if conditions prevent a complete cure before sunset, rain, fog, dew or freezing temperatures. Coatings must be completely dry before exposing to water or foot traffic. Keep containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.